This unique combination of 129mm western red cedar and 18mm clear, blue or black anodised aluminium decorative strips are glued and screwed horizontally to a 50 x 50 x 1.6 box section mill finish aluminium frame.
Options
Ask our representative about the option to powder coat your frame and hardware if your home is in a coastal, corrosive suburb. Or if you would just prefer your door to look as perfect on the inside as the outside.
Stainless Steel Cables
High Cycle Springs
Powder Coating Hardware (where possible)
Powder Coating Frame
This is raw cedar; we do suggest that at least a base coat of Sikkens is put on the door prior to installation to ensure the doors protection against the weather.
Option 1 BASE COAT: One coat of Sikkens HLS077 Pine in and out of the door.
Option 2 FULL STAIN: One coat of Sikkens HLS077 Pine in and out of the door and Two Topcoats of Sikkens Supernatural (water-borne system) to the outside.
If you require another colour such as 006 Light Oak, 009 Dark Oak, 010 Walnut, 013 Silver Grey, 020 Ebony, 045 Mahogany, 048 Rosewood, 065 Olive Green or 085 Teak, you will need to order your western red cedar door RAW and have a professional painter apply the Sikkens of your choice on site. Harris Doors will not experiment with colours, please refer to notes to below. You must stain your door immediately after installation before it is affected and marked by the elements. The cedar should not get damp or wet until fully sealed.
N.B. Colours shown are a guide only and may vary with different wood species, colour, grain and texture; whether surface is
smooth or rough sawn. Cedar is only dressed on external face, not internal. Harris Doors will not be held liable for imperfections
in mill finish aluminium on any of its cedar doors.
Natural timber has a random, variable grain, colour pattern and knots which will be slightly different from door to door and
cannot be avoided. The company will not accept claims for variations of colour pattern and/or grain.